| 品牌 | 其他品牌 | 電動機功率 | 60/120/240kW |
|---|---|---|---|
| 外形尺寸 | 96*96mm | 重量 | 0.3kg |
| 應用領域 | 環保,生物產業,文體,電子,綜合 | 速度范圍 | 0-1500RPM |
| 分辨率 | 1RPM | 電機類型 | FOC直流無刷電機,伺服電機 |
| 電機功率 | 驅動電流2.5A/5A/10A | 供電電源 | 直流24V |
適用范圍 Application
LANKAI 高精度FOC直流無刷電機控制器廣泛適用于各式振蕩器，搖床，電動攪拌器，反應釜等高精度恒速設備。
DC motor constant speed controller application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.
產品特點 Features
LANKAI 高精度FOC直流無刷電機控制器LKSC-C系列是高性能、高精度的智能速度控制模塊，其特點如下：
①采用最新FOC 正弦波矢量控制技術和模糊PI控制技術，運行平穩，緩啟緩停，大力矩，輕噪音，發熱低，可長時間穩定運行，帶過流過速堵轉保護電機等功能。
②恒速， 恒扭矩模式可一鍵切換。
③可集成恒溫功能， 可組合加熱、制冷、恒濕、風機、門鎖等功能。
④可設置99段程序，多種液晶顯示規格可選。
⑤標配1500RPM，扭矩0.2-1.2NM的57&86直流無刷電機，也可適配其他支持FOC的無刷電機或伺服電機
⑥ 擴展： 支持 232接口和標準485ModBus-RTU協議，可接電腦上位機軟件控制，PLC等，支持MODBUS協議標準外設。
①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.
②Can set to operate by constant speed or constant torque mode.
③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.
④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.
⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.
技術參數 Technical Parameter
速度范圍 Measurement range | 0-1500RPM | ||||||
測量誤差 Inaccuracy of measurement | ±1%FS ±1% Revolution/minute | ||||||
分 辨 率 Display resolution | 1 RPM | ||||||
電機類型 Motor Type | FOC矢量直流無刷電機，伺服電機 FOC vector control brushless DC motor， servo motor | ||||||
電機功率 Motor power | 驅動電流 2.5A/5A/10A Drive current 2.5A/5A/10A | ||||||
供電電源 Supply voltage | 直流24V DC24V | ||||||
程序段 Program segment | 10段編程 10 program segments | ||||||
定時范圍 Timer range | 0-99H59Min | ||||||
工作環境 Working condition | -5℃—50℃，相對濕度35%—85% Environment temperature:-5℃—50℃, Relative humidity：35%—85% | ||||||
外觀尺寸 Exterior size | 96mm*96mm | ||||||
開孔尺寸 Hole size | 92mm*92mm | ||||||
電源板尺寸 Power Panel size | 110mm*170mm (10A) & 100mm*100mm(2.5A &5A) | ||||||
